Accelerometer Mounting Studs & Accessories

In addition to instruments, cables and joiners, Kemo can also supply a range of accelerometer mounting studs and sensor accessories commonly used by our customers, these are generally available from stock and we are continuously expanding our range.

Our accessory range includes a wide choice of accelerometer mounting studs, magnets, petrowax and adhesive bases. The options include both isolated and non-isolated types.

Correct accelerometer mounting is a critical part of achieving high quality data with minimal noise and errors, the world of dynamics testing is a tricky one to master, at Kemo we have decades of testing experience and we can advise on teh best solutions for your test.

We can also supply the widely used handheld accelerometer calibrator VTCAL1 which provides an ideal field based testing solution to check correct accelerometer operation prior to test. Operating with a fixed 1grms amplitude and frequency of 159.2Hz, it is battery powered and comes in its own carry case.

KMISO-S1

We hold a stock of isolating mounting studs that can be used with accelerometers, the KMISO-S1 has a 10/32UNF to 10/32UNF thread

DOWNLOAD Datasheet

KMISO-S2

We hold a stock of isolating mounting studs that can be used with accelerometers, the KMISO-S2 has a 10/32UNF to M5 thread

DOWNLOAD Datasheet

KMISO-S3

We hold a stock of isolating mounting studs that can be used with accelerometers, the KMISO-S3 has a 5-40UNC to 10/32UNF thread

DOWNLOAD Datasheet

KMISO-S4

We hold a stock of isolating mounting studs that can be used with accelerometers, the KMISO-S4 has a 5-40UNC to M5 thread

DOWNLOAD Datasheet

KMMAG-14

Isolated mounting magnet for use with smaller accelerometers.

14.5mm A/F, high pull strength

DOWNLOAD Datasheet

KMMAG-21

Isolated mounting magnet for use with accelerometers.

21.3mm A/F, ideal for medium size accelerometers, high pull strength

DOWNLOAD Datasheet

KMMAG-21S

Isolated mounting magnet for use with accelerometers.

21.3mm A/F, ideal for medium size accelerometers, high pull strength

Integrated 10/32UNF stud

DOWNLOAD Datasheet

KMISO-ADH

Isolated hard anodised aluminium mounting base for adhesive mounting of accelerometers

DOWNLOAD Datasheet

VTCAL1 - Handheld Accelerometer Calibrator

The VTCAL1 is a battery operated handheld calibrator for use with accelerometer and vibration sensors.

Operating at a fixed frequency of 159.2Hz and a fixed amplitude of 1grms

DOWNLOAD Datasheet

KMS-ADH1

Adhesive mount for accelerometers.

14.3mm A/F, 10/32UNF integral stud

DOWNLOAD Datasheet

KMS-ADH2

Adhesive mount for accelerometers.

9.5mm A/F, 5/40UNC integral stud

DOWNLOAD Datasheet